2-channel RS485 Modbus RTU analog output module. The protocol is compatible with 12-channel registers; hardware has two outputs.
Tax-inclusive reference prices in CNY. Negotiable; the quotation reflects the selected configuration, quantity and delivery requirements. All products carry a 3-year warranty.
For a complete system, include the power supply, sensors, communication access and platform deployment in your enquiry.
2-channel RS485 Modbus RTU analog output module. The protocol is compatible with 12-channel registers; hardware has two outputs.
The page is written for engineering companies, system integrators, device manufacturers and B2B project procurement teams.
The general analog output module serves industrial voltage or current signal control. For four-channel 0-10V lighting dimming with an external TRIAC power driver, select the dedicated ZMSR0004-1G module.
Analog outputs provide control signals to actuators or instruments. Separate output control from input acquisition, then match signal type, channels and the receiving interface.
Choose the dimming chain by the lamp driver. This module supplies 0–10V control signals; a matched external power driver handles the AC load. Circuit switching and local operation use separate controllers and panels.
View product detailsPlan multi-channel voltage acquisition by signal range, sampling requirements and the host system. Frequency counting and energy metering are different measurement tasks with separate device choices.
View product details| Output options | Voltage or current output, depending on model |
|---|---|
| Communication interface | RS485 |
| Protocol | Modbus RTU |
| Serial settings | Configurable address, baud rate and parity |
| Mounting | 35mm DIN rail or screw mounting |
| Product type | 2-channel RS485 analog output module |
| Hardware output channels | 2 channels |
| Protocol compatibility | 12-channel register definition; 2 hardware outputs |
The 2-channel analog output module receives commands over RS485 Modbus RTU and supplies two analog control signals for VFDs, valves or actuators. Select voltage or current outputs to match the receiving interface. The protocol is compatible with a 12-channel register definition; this hardware provides two outputs, so wiring and connected equipment are planned for two channels.
An analog setpoint represents the requested speed, position or process value. Actual action also depends on actuator settings and operating conditions. A separate acquisition channel can read feedback for closed-loop visibility. Examples include environmental sensing plus fan setpoints, or PLC valve commands plus position feedback and alarms.
Record the address, channel, signal type, engineering range and actuator for each output. Define how percentages or engineering units map to output values. Keep serial settings consistent and addresses unique. Checking several setpoints before enabling automatic policies separates scaling, communication and field-response issues and simplifies later replacement.
No. Voltage and current outputs have different receiving and wiring requirements. Match both device interface definitions.
No. Actual position requires actuator feedback or another measurement. A platform can display setpoint and feedback together.
Call us or leave your contact details for product selection and project enquiries.
Call us+86 16605298829Taobao Store ↗Open the Zhenming IoT platform, product documentation or official Taobao store.