Industrial communication interface and RS485 commissioning module

Isolated USB to RS485 Converter

Isolated USB to RS485 converter for connecting computers, industrial PCs and engineering tools to RS485 field devices through A, B and GND terminals.

Contact 16605298829 Back to Products

Isolated USB to RS485 Converter product image

Product Positioning

Isolated USB to RS485 converter for connecting computers, industrial PCs and engineering tools to RS485 field devices through A, B and GND terminals.

Capability 01USB interface for computers, industrial PCs and engineering tools

Capability 02Isolated USB to RS485 communication connection

Capability 03A, B and GND terminals for RS485 field wiring

Capability 04Suitable for controllers, PLCs, HMIs, meters, sensors and industrial IO modules

Typical Applications

The page is written for engineering companies, system integrators, device manufacturers and B2B project procurement teams.

Selection Notes for B2B Projects

Field DeviceConfirm that the controller, meter, sensor, IO module or drive uses an RS485 communication interface.

WiringConnect the field bus according to the device A, B and GND terminal definition, then check communication parameters in the commissioning software.

Application RoleUse the converter as the computer-side RS485 interface for commissioning, data reading, protocol integration and maintenance workflows.

Integration and Deployment

Signal DefinitionConfirm the electrical signal, range, channel mapping and field terminal definition before cabinet design.

Bus PlanningPlan device address, communication parameters, cable route and host or gateway connection.

System MappingMap each channel to a clear sensor, actuator, meter or equipment object in the host system.

CommissioningVerify wiring, communication, data direction and control boundaries during system integration.

Selection FAQ

Which RS485 devices can be connected?The converter can be used to connect computers or industrial PCs with RS485 controllers, PLCs, HMIs, meters, sensors, industrial IO modules, drives and gateways.

How is the field bus wired?Connect the RS485 field bus to the A, B and GND terminals according to the terminal definition of the device being commissioned.

Can it be used for Modbus RTU commissioning?It can be used as the computer-side RS485 interface for Modbus RTU device setup, data reading, protocol integration tests and maintenance.

Project Inquiry

Share the application, communication method, quantity and integration requirements so we can prepare a suitable product combination.

Email: djbgreen@163.com